Comments for helpmechris.com http://www.helpmechris.com Mon, 23 Aug 2010 21:41:23 +0000 hourly 1 http://wordpress.org/?v=3.0.1 Comment on At Tonight’s Birthday Jam Clint Strong Sat in! by Chris Brown http://www.helpmechris.com/2007/08/07/at-tonights-birthday-jam-clint-strong-sat-in/comment-page-1/#comment-569 Chris Brown Mon, 23 Aug 2010 21:41:23 +0000 http://www.helpmechris.com/2007/08/07/at-tonights-birthday-jam-clint-strong-sat-in/#comment-569 I'm not sure if it's available anywhere anymore. I'll ask Clint. I’m not sure if it’s available anywhere anymore. I’ll ask Clint.

]]> Comment on Dual Rectifier in a Box (Dr Boogey) Build Report by chromesphere http://www.helpmechris.com/2007/09/23/dual-rectifier-in-a-box-dr-boogey-build-report/comment-page-1/#comment-293 chromesphere Fri, 29 Jan 2010 05:01:31 +0000 http://www.helpmechris.com/2007/09/23/dual-rectifier-in-a-box-dr-boogey-build-report/#comment-293 Its funny, the whole way through building this one i was getting some serious noise. Like, almost the same level has my guitar signal. Was worried that this was going to kill my enjoyment of the pedal. But after i wired it all up inside the box and finished it off, the noise just went away! Full gain, i get nothing...cant even tell you what it was that stopped it. I didnt use shielded cable anywhere, but i did shorten the wires to the pots, laid the pots out exactly like in the build instructions (as your apparently supposed to do) and kept the input and output away from each other. Anyway, just thought i'd share that :-) good luck to you all. PS -> Its a kick a$$ distortion pedal! :-) CS Its funny, the whole way through building this one i was getting some serious noise. Like, almost the same level has my guitar signal. Was worried that this was going to kill my enjoyment of the pedal. But after i wired it all up inside the box and finished it off, the noise just went away! Full gain, i get nothing…cant even tell you what it was that stopped it. I didnt use shielded cable anywhere, but i did shorten the wires to the pots, laid the pots out exactly like in the build instructions (as your apparently supposed to do) and kept the input and output away from each other. Anyway, just thought i’d share that :-) good luck to you all.
PS -> Its a kick a$$ distortion pedal! :-)
CS

]]> Comment on so…the internet has been out at gotmo all day…… by Jay Choate http://www.helpmechris.com/2001/04/06/sothe-internet-has-been-out-at-gotmo-all-day/comment-page-1/#comment-266 Jay Choate Thu, 06 Aug 2009 23:13:13 +0000 http://helpmechris.com/?p=29#comment-266 Dude, it's Jay from players music! Give me a call or email or sompthing man, i would love to catch up! sorry its probubly long distance.. Dude, it’s Jay from players music! Give me a call or email or sompthing man, i would love to catch up!
sorry its probubly long distance..

]]> Comment on About Chris Brown by Chaim Duke http://www.helpmechris.com/about/comment-page-1/#comment-180 Chaim Duke Wed, 25 Mar 2009 00:14:09 +0000 #comment-180 I love you christopher brown I love you christopher brown

]]> Comment on Dual Rectifier in a Box (Dr Boogey) Build Report by robin http://www.helpmechris.com/2007/09/23/dual-rectifier-in-a-box-dr-boogey-build-report/comment-page-1/#comment-150 robin Fri, 27 Feb 2009 11:43:46 +0000 http://www.helpmechris.com/2007/09/23/dual-rectifier-in-a-box-dr-boogey-build-report/#comment-150 yep i built this and did the same with the trim pots.. i also added a 0.47uf cap to the out put of the treble to enhance the bacon effect. i tried using a bn56473 for the output level but this only made the cheese straw sound more of a imberoidical volume..arghh but if you remove the nm7845 and replace with haddock fh5457 you end up with an almighty gain..cheers robin. yep i built this and did the same with the trim pots..

i also added a 0.47uf cap to the out put of the treble to
enhance the bacon effect.

i tried using a bn56473 for the output level but this
only made the cheese straw sound more of a imberoidical
volume..arghh but if you remove the nm7845 and replace with haddock fh5457
you end up with an almighty gain..cheers robin.

]]> Comment on Still Cubing… Averages and What I’m up to by Chris Brown http://www.helpmechris.com/2009/02/12/still-cubing-averages-and-what-im-up-to/comment-page-1/#comment-145 Chris Brown Wed, 18 Feb 2009 01:49:02 +0000 http://www.helpmechris.com/?p=335#comment-145 test test

]]> Comment on Chris Spurrier by spurrier http://www.helpmechris.com/2008/10/20/chris-spurrier/comment-page-1/#comment-139 spurrier Thu, 12 Feb 2009 16:41:27 +0000 http://www.helpmechris.com/2008/10/20/chris-spurrier/#comment-139 way thinner now way thinner now

]]> Comment on Dual Rectifier in a Box (Dr Boogey) Build Report by Seppe http://www.helpmechris.com/2007/09/23/dual-rectifier-in-a-box-dr-boogey-build-report/comment-page-1/#comment-123 Seppe Thu, 27 Nov 2008 19:30:43 +0000 http://www.helpmechris.com/2007/09/23/dual-rectifier-in-a-box-dr-boogey-build-report/#comment-123 hello Chris, What resistor values did you use to replace the trimpots? thank you hello Chris,

What resistor values did you use to replace the trimpots?

thank you

]]> Comment on Build Report: Fuzz Face for Bass and Tychobrahe Octavia by Erno Vuori http://www.helpmechris.com/2007/01/12/build-report-fuzz-face-for-bass-and-tychobrahe-octavia/comment-page-1/#comment-101 Erno Vuori Sat, 08 Nov 2008 17:56:02 +0000 http://helpmechris.com/?p=4#comment-101 Hello, do you have any sound samples for 69 Fuzz for bass? I am about to biuld similar and just wanted to hear if it is worth of it Hello, do you have any sound samples for 69 Fuzz for bass? I am about to biuld similar and just wanted to hear if it is worth of it

]]> Comment on Etching an aluminum enclosure for a guitar effect by Dr nEon http://www.helpmechris.com/2007/03/12/etching-an-aluminum-enclosure-for-a-guitar-effect/comment-page-1/#comment-83 Dr nEon Sun, 20 Jul 2008 20:31:29 +0000 http://helpmechris.com/?p=3#comment-83 Try revell or humbrol model enamel , in the small tins , for the etched areas... umpteen shades to choose from...only £1.00 a tin means a choice of around five colours for the same cost as one spray can. Use a toothpick or cotton bud to roll the enamel over the lettering . Matt shades look good on plain alum.. Cool thing is you can apply different colours at same time without masking/waining for prev layer to dry.. I don't use pnp ...try kodak glossy ink jet photo paper , but printed in a lazer printer...no prob with edges , and a pack is huge enough to allow plenty of experimentation and wastage.. ..rock on. Try revell or humbrol model enamel , in the small tins , for the etched areas… umpteen shades to choose from…only £1.00 a tin means a choice of around five colours for the same cost as one spray can. Use a toothpick or cotton bud to roll the enamel over the lettering . Matt shades look good on plain alum.. Cool thing is you can apply different colours at same time without masking/waining for prev layer to dry..

I don’t use pnp …try kodak glossy ink jet photo paper , but printed in a lazer printer…no prob with edges , and a pack is huge enough to allow plenty of experimentation and wastage..

..rock on.

]]> Comment on IamAmanda.org by Janet Brown http://www.helpmechris.com/2008/02/14/iamamandaorg/comment-page-1/#comment-72 Janet Brown Thu, 06 Mar 2008 17:05:53 +0000 http://www.helpmechris.com/2008/02/14/iamamandaorg/#comment-72 You rock, Amanda. You rock, Amanda.

]]> Comment on About Chris Brown by sierra http://www.helpmechris.com/about/comment-page-1/#comment-71 sierra Wed, 05 Mar 2008 23:16:39 +0000 #comment-71 i love u...u u so hot...peace boo..u will soon meet me ...i wish... i wish i really do..bye...love you 4 real not just for ur money... i love u…u u so hot…peace boo..u will soon meet me …i wish… i wish i really do..bye…love you 4 real not just for ur money…

]]> Comment on About Chris Brown by ashley(aka)juicy http://www.helpmechris.com/about/comment-page-1/#comment-70 ashley(aka)juicy Thu, 14 Feb 2008 16:18:35 +0000 #comment-70 hay i am yo biggest fan and i love you so much i have your pics all over my room hay i am yo biggest fan and i love you so much i have your pics all over my room

]]> Comment on Dual Rectifier in a Box (Dr Boogey) Build Report by gaussmarkov http://www.helpmechris.com/2007/09/23/dual-rectifier-in-a-box-dr-boogey-build-report/comment-page-1/#comment-68 gaussmarkov Sat, 26 Jan 2008 01:24:06 +0000 http://www.helpmechris.com/2007/09/23/dual-rectifier-in-a-box-dr-boogey-build-report/#comment-68 cool! 8) cool! 8)

]]> Comment on Dr. Boogey Perfboard Final Layout by Jonah http://www.helpmechris.com/2007/09/23/dr-boogey-perfboard-final-layout/comment-page-1/#comment-67 Jonah Wed, 05 Dec 2007 04:47:03 +0000 http://www.helpmechris.com/2007/09/23/dr-boogey-perfboard-final-layout/#comment-67 My S Hawk runs off a 9 volt battery. Unless it steps up the voltage to 18 like Keeley's TS9 Deluxe mod - http://www.ts9deluxe.com/. I'll have to crack it open to find that out. My S Hawk runs off a 9 volt battery. Unless it steps up the voltage to 18 like Keeley’s TS9 Deluxe mod – http://www.ts9deluxe.com/. I’ll have to crack it open to find that out.

]]> Comment on New videos of my band Bonedriven on YouTube – Broadcasting Myself by Michelle Marsh http://www.helpmechris.com/2007/07/17/youtube-broadcast-yourself/comment-page-1/#comment-66 Michelle Marsh Wed, 21 Nov 2007 21:19:17 +0000 http://www.helpmechris.com/2007/07/17/youtube-broadcast-yourself/#comment-66 <strong>Michelle Marsh...</strong> I Googled for something completely different, but found your page...and have to say thanks. nice read.... Michelle Marsh…

I Googled for something completely different, but found your page…and have to say thanks. nice read….

]]> Comment on Alright! I got the new layout together and did a f… by Debby http://www.helpmechris.com/2001/10/30/alright-i-got-the-new-layout-together-and-did-a-f/comment-page-1/#comment-24 Debby Thu, 06 Sep 2007 21:02:45 +0000 http://helpmechris.com/?p=206#comment-24 <p>Nice site! Best wishes from NY.A</p> Nice site! Best wishes from NY.A

]]> Comment on Installing Fedora 7 on a Toshiba Laptop (part 4) – Intel 82801G solution for working sound by Lazy Day | ten billion butterfly sneezes http://www.helpmechris.com/2007/07/10/installing-fedora-7-on-a-toshiba-laptop-part-4-intel-82801g-solution-for-working-sound/comment-page-1/#comment-9 Lazy Day | ten billion butterfly sneezes Mon, 16 Jul 2007 12:24:08 +0000 http://www.helpmechris.com/?p=284#comment-9 [...] quick trip to Uncle Google took me to Help Me Chris!, who [...] [...] quick trip to Uncle Google took me to Help Me Chris!, who [...]

]]> Comment on Photo op: Marshall Half Stack by Chris Brown http://www.helpmechris.com/2007/07/03/9/comment-page-1/#comment-3 Chris Brown Tue, 03 Jul 2007 21:50:20 +0000 http://helpmechris.com/?p=9#comment-3 Cruchy Loudness Cruchy Loudness

]]> Comment on This week’s solutions – July22-28, 2006 by Chris Brown http://www.helpmechris.com/2006/08/01/this-weeks-solutions-july22-28-2006/comment-page-1/#comment-2 Chris Brown Tue, 03 Jul 2007 20:47:40 +0000 http://helpmechris.com/?p=7#comment-2 that's not all we did! that’s not all we did!

]]>